今天就为大家简单的介绍一下传送带模块的基本内容，首先是传送带模块的位置，跟其他实体一样拥有一个板块。

Today, I will briefly introduce the basic content of the conveyor belt module. The first is the location of the conveyor belt module, which has a block like other entities.

它的基本使用方法与其他实体一样选用拖拽式，或者是直接点击右键添加传送带模块，它的基本外观造型与普通传送带没有特别大的区别。

Its basic usage method is the same as other entities, using drag-and-drop, or directly right-clicking to add a conveyor belt module. Its basic appearance is not particularly different from ordinary conveyor belts.

但是我们都知道其他实体的实体大小是可以直接拖动的，普通传送带长度需要设置，但是传送带模块的大小设置，可以靠其两端的十字箭头直接拖拽，改变其大小及方向。

But we all know that the physical size of other entities can be dragged directly. The length of the ordinary conveyor belt needs to be set, but the size of the conveyor belt module can be directly dragged by the cross arrows at both ends to change its size and direction.

还有一种传送带叫做弯曲传送带，弯曲传送带基本操作一样只是存在一个绿色的箭头代表其半径。弯曲传送带一般情况下用作衔接的功能。

There is also a conveyor belt called a curved conveyor belt. The basic operation of the curved conveyor belt is the same as there is a green arrow to represent its radius. Curved conveyor belts are generally used as a joint function.

但是一般情况下使用弯曲传送带连接是比较不方便难以配合较好的，因此有一个专门的工具，进行传送带模块的连接，只需选择连接工具后，左键选择起始传送带，再选择终止传送带便可以自动连接。

However, in general, it is inconvenient and difficult to use a curved conveyor belt to connect, so there is a special tool to connect the conveyor belt module. Just select the connection tool, left-click to select the starting conveyor belt, and then select the ending conveyor belt. Can connect automatically.

其次传送带模块中还有其他实体，他们的主要作用是控制传送带上的临时实体，进行一系列的触发设置，他们添加在传送带上，表示到达传送带某个位置的时候进行相关参数的触发，比如Decision point ，他主要表示到达触发和离开触发，我们可以进行相关设置。

Secondly, there are other entities in the conveyor belt module. Their main function is to control the temporary entities on the conveyor belt and perform a series of trigger settings. They are added to the conveyor belt to indicate that relevant parameters are triggered when reaching a certain position on the conveyor belt, such as Decision point , he mainly represents the arrival trigger and the departure trigger, we can set related settings.

Phtot eye就跟平常的关键传感器一样，主要是传送带堵塞、清空等时候进行的条件触发。

Photo eye is the same as the usual key sensor, mainly triggered by the conditions when the conveyor belt is blocked, emptied, etc.

接下来便是motor，它主要用来控制多个传送带传送的工具，关于它的介绍，我们下次再介绍。

Next is the motor, which is mainly used to control the transmission of multiple conveyor belts. We will introduce it next time.

然后就是合流控制器，它主要的功能就跟其图标差不多，就是将分支进行合并输出，关于它的详细使用介绍我们也下次再介绍。

Then there is the confluence controller. Its main function is similar to its icon, which is to merge the branches and output. We will introduce the detailed introduction of it next time.

以上就是本次关于其传送带模块的基本介绍，希望对您有一定的帮助！

The above is the basic introduction of its conveyor belt module, I hope it will be helpful to you！

参考资料：腾讯课堂《从小白到大神》

英文翻译：Google翻译

本文由LearningYard新学苑原创，部分资源来源于网络，若有侵权请联系删除。